Concrete Contractors Terms Explained: A Plain-English Glossary
If you are getting quotes for a driveway, patio, or sidewalk in Salt Lake City, the paperwork can read like a foreign language. This concrete contractors glossary turns the most common terms into plain English so you can read an estimate line by line and know what you are paying for. Use it to compare bids, ask sharper questions, and spot a thin scope before you sign anything. Every entry here stands on its own, so skim to the word that confused you and move on.
- Flatwork: any flat poured concrete, like driveways and patios
- Slab: the poured concrete panel itself
- Subgrade: the soil the concrete sits on
- Base (gravel base): compacted rock layer under the slab
- Rebar: steel bars that reinforce concrete
- Wire mesh: steel grid reinforcement for thinner slabs
- Forms: the temporary molds that shape the pour
- PSI: the strength rating of a concrete mix
- Control joints: planned grooves that manage cracking
- Expansion joints: gaps that let slabs move without binding
- Curing: the slow hardening period after the pour
- Broom finish: a textured, slip-resistant surface
- Stamped concrete: patterned, decorative concrete
- Resurfacing: a new top layer over worn concrete
- Crack repair: filling and sealing cracks to stop spread
- Spalling: surface flaking, common after freeze-thaw winters
- Frost heave: slabs lifting when the ground freezes
- Mobilization: the cost of getting crew and equipment to you
Glossary of Concrete Contractors Terms
These are the words that describe what actually gets built. They show up on almost every estimate from concrete contractors, and this part of the concrete contractors glossary covers the structure under your feet.
Flatwork
Flatwork is any concrete poured flat and level on the ground, including driveways, patios, sidewalks, and garage floors. It is the catch-all word for most residential concrete, as opposed to walls or foundations. If a contractor says they do flatwork, they mean the horizontal surfaces around your home. Most of what Salt Lake Valley Concrete pours, from a driveway in Murray to a backyard patio, falls under this word.
Slab
A slab is a single poured panel of concrete, usually several inches thick, that forms a driveway, patio, or floor. Thickness matters: driveways that carry vehicles need thicker slabs than a walkway that only carries foot traffic. When an estimate lists slab size in square feet and thickness in inches, you can compare bids apples to apples. A bid that skips thickness is a bid worth questioning.
Subgrade
Subgrade means the native soil under your concrete after it has been graded and compacted. Concrete is only as stable as what it sits on, and the clay and gravel soils along the Wasatch Front vary from lot to lot. Clay can expand and shrink with moisture, which moves slabs over time. A contractor who talks about subgrade prep is telling you they plan to deal with your soil, not just pour over it.
Base (Gravel Base)
A base is a layer of crushed rock or gravel compacted on top of the subgrade before concrete is poured. It drains water away from the slab, spreads loads evenly, and gives the concrete a stable, uniform platform. Skipping or thinning the base is a common way low bids cut corners, and the slab pays for it later with cracking and settling. Ask every bidder what base they include and how it gets compacted.
Rebar
Rebar is steel reinforcing bar placed inside concrete to hold it together and add strength. Concrete is strong under weight but weak when pulled or bent, and steel makes up that difference. Rebar matters most in driveways and anywhere a slab carries vehicles. If one quote includes rebar and another does not, the two slabs are not the same product, even if the square footage matches.
Wire Mesh
Wire mesh is a welded grid of steel wire laid inside a slab as lighter-duty reinforcement. It helps hold a slab together if cracks form, keeping them tight instead of letting them spread apart. Mesh is common in patios and sidewalks where loads are lighter. Your contractor should be able to explain why they chose mesh or rebar for your specific project.
Forms
Forms are the temporary wood or metal borders set up to hold wet concrete in shape until it hardens. Setting forms is where the final size, height, and slope of your slab get locked in. Good forming is why a finished driveway drains toward the street instead of toward your garage. "Form and pour" on an estimate just means building the mold and filling it.
PSI
PSI stands for pounds per square inch and rates how strong a concrete mix is after it fully hardens. Higher PSI means a denser, stronger mix, which matters for driveways and for surviving hard freeze-thaw winters. Your estimate should name the mix strength, and your contractor should explain why that mix fits your project. A stronger mix costs more, so PSI is one of the quiet drivers of price.
How Contractors Manage Joints, Curing, and Finishes
Fresh concrete does not become a finished surface on its own. These terms cover how contractors control cracking, let the slab harden, and give it its final look.
Control Joints
Control joints are shallow grooves cut or tooled into a slab to tell it where to crack. All concrete shrinks slightly as it cures, and it will crack somewhere; joints steer those cracks into straight, hidden lines. The grooves you see across every sidewalk are control joints doing their job. Random cracks away from the joints are the sign of a problem, not the joints themselves.
Expansion Joints
Expansion joints are gaps, often filled with a flexible material, placed where a slab meets another structure like a foundation, step, or existing driveway. They let each piece of concrete move independently as temperatures swing. Along the Wasatch Front, where slabs freeze in winter and bake in summer, that room to move prevents binding and breaking at the edges. Look for them anywhere new concrete touches old.
Curing
Curing is the period after the pour when concrete slowly gains strength through a chemical reaction with water. It is not just drying; concrete needs to stay moist and protected for days to reach its rated strength. Your contractor should tell you how long to stay off the new slab on foot and how long to keep vehicles off. Rushing a cure, or pouring in the wrong weather, shortens the life of the work.
Broom Finish
A broom finish is a light texture dragged across fresh concrete with a broom to make the surface slip resistant. It is the standard finish for driveways and sidewalks because it gives traction when wet or icy. In a town with real winters, that texture matters every time you walk to the car in January. Smoother trowel finishes look sleek but can be slick outdoors.
Stamped Concrete
Stamped concrete is concrete pressed with patterned mats while still wet so it mimics stone, brick, or tile. It is a decorative concrete option that costs more than a plain broom finish because of the extra labor, coloring, and sealing involved. Stamped patios and walkways usually need periodic resealing to keep their color and protect the texture. If a quote for stamped work seems cheap, ask what sealing and coloring it includes.
Concrete Contractors' Repair and Problem Words
When something goes wrong with existing concrete, these are the words you will hear. Knowing them helps you tell a cosmetic fix from a structural one.
Resurfacing
Resurfacing means applying a new, thin layer of concrete or overlay material on top of an existing slab to renew its surface. It works when the slab underneath is still sound but the top looks worn, pitted, or stained. Resurfacing costs less than tearing out and repouring, which is why contractors offer it as a middle option. It cannot fix a slab that is badly cracked, sunken, or heaving; those need bigger repairs or replacement.
Crack Repair
Crack repair is the process of cleaning, filling, and sealing cracks in concrete to stop water from getting in and making them worse. In Salt Lake City, water in a crack freezes in winter, expands, and pries the crack wider every season. Sealing cracks early is cheap insurance against that cycle. A contractor assessing crack repair should tell you whether the crack is cosmetic or a sign the slab is moving.
Spalling
Spalling is the flaking or chipping of a concrete surface, leaving rough, pitted patches. It often shows up after freeze-thaw winters, heavy deicing salt use, or a weak original finish. Light spalling can sometimes be fixed with resurfacing; deep spalling may mean the surface layer has failed. If you see flaking on a newer slab, bring it up with whoever poured it.
Frost Heave
Frost heave means a slab lifting or tilting because the moist ground beneath it froze and expanded. It is a common winter problem in cold climates and a key reason good base and drainage work matter here. A heaved sidewalk panel creates trip hazards and uneven joints. Fixing heave means fixing what is under the slab, not just the concrete you can see.
Mobilization
Mobilization is the cost of getting a crew, equipment, and materials to your site and set up to work. It is part of why small jobs cost more per square foot than large ones; the setup effort is similar either way. Tight site access, like a backyard patio with no gate wide enough for equipment, raises this cost because more work happens by hand. Whether you are in Salt Lake City proper or out in Riverton or Bountiful, it is fair to ask how access affects your price.
Key Terms in the Concrete Contractors Glossary
You now have enough vocabulary to read a concrete estimate line by line and notice what is missing: base depth, reinforcement, joints, mix strength, and finish. That is the whole point of this glossary for contractors, turning jargon into questions you can ask with confidence. When two bids differ, these terms help you find out why before you pick one.
If you need concrete contractors, Salt Lake Valley Concrete can help.
Prefer to talk it through? Call (385) 433-4634 — a quick call is usually the fastest way to get a straight answer for your situation.